Filter
Top Products
Always carry the printer with both hands
gripping both ends of the printer.
To avoid dropping the printer and
causing injury, always carry it
carefully when moving it to another
location.
Power supply
Always grasp the plug when you unplug the
power cord.
Pulling on the power cord could
damage the cord and cause a fire
or electric shock.
Never use an extension cord.
To avoid a fire or electric shock,
always plug the power cord
directly into the power outlet.
Never use a power supply voltage other than
that supplied in the country where you
purchased the printer.
Using incorrect voltage could
cause a fire or electric shock.
The correct power supply voltages
for this printer are determined by
the country of purchase:
USA/Canada AC 120V, 60 Hz
Australia AC 240V, 50 Hz
Europe AC 230V±10%, 50 Hz
Working around the printer
Never insert your fingers or hands inside the
printer while it is printing.
The printer contains moving parts
which could cause injury.
Never place anything on top of the printer,
especially metal objects (paper clips, staples,
etc.), or containers with flammable solvents
(alcohol, thinners, etc.)
Objects falling into the printer
could cause a fire or electric
shock.
If any foreign object, especially a piece of
metal or liquid, falls into the printer,
immediately press the POWER button to
switch the printer off, unplug the power cord
and call for service.
Continuing to use the printer after
a foreign object has fallen into it
could cause a fire or electric
shock.
Caution
4