Filter
Top Products
Insert the BJ Print Head into the BJ Print Head holder.
Lower the lock lever until you hear it lock.
Install the ink tanks in the new BJ Print Head.
• You can install new ink tanks or remove the ink tanks from the old
BJ Print Head and install them in the new BJ Print Head.
• Install ink tanks as soon as you remove them from their package, or
from the old BJ Print Head. If an ink tank dries out, it cannot be
used.
• Replacing an ink tank (P.74)
Close the front cover.
• The print head holder returns to the home position and print head
cleaning starts automatically. The POWER/ERROR lamp flashes for
about 1 minute until print head cleaning is finished.
• Always align the print head after replacing the BJ Print Head.
• To align the print head correctly, you will need one sheet of High
Resolution Paper.
• Aligning the print head (P.62)
Reference
7.