Filter
Top Products
Error Messages
19
7-19
Problem 2: The Media Size and Media Type set with the printer driver do not match
the Media Size and Media Type set with the operation panel (as loaded in
the cassette.)
Solution: Load paper of the size and type selected for the Media Size and Media
Type selections on the Main tab of the printer driver. On the printer
operation panel, make sure that the Media Size and Media Type settings
for the supply source match the size of the paper, then press the Online
button. (ÆP.2-13)
Use the Remote UI to cancel the print job when you want to release the
error and continue with the next print job. The print job cannot be
cancelled with the printer operation panel.
No Media:Manual
Problem 1: Paper could not feed from the tray.
Solution: Load the media in the tray and press the Online button. (ÆP.2 -17 )
Media Jam
Problem 1: Paper has jammed in the printer.
Solution: Remove the jammed media and press the Online button. (ÆP.7 -2 0)
Load Media
Problem 1: The printer is waiting for paper or other print media to be loaded in the
tray.
Solution: Load the specified print media in the tray and press the Online button.
(ÆP.2-17)
Remove Media
Problem 1: The printer is waiting for removal of paper or other print media from the
tray.
Solution: Remove the paper or other print media from the tray and press the Online
button. (ÆP.2-17)