Filter
Top Products
Error Messages
17
7-17
x Ink Check
Problem 1: Ink in the ink tank of the displayed color (x = Y, M, PM, C, PC, Bk) is
running low.
Solution: Read the message and select the correct color ink tank for replacement.
Make sure that the new ink tank is installed correctly.
Ink level ?
Problem 1: The ink level detection function is set to off.
Solution: The message is displayed when the print job is executed, and the printer is
set to offline. Press the Online button to continue the print job.
Solution: To retrieve the ink level display, replace the ink tanks specified for use
with this printer.
Ext. I/F Error
Problem 1: An error occurred during data transfer at the network interface board.
Solution: Press the Online button. However, the print job data stream cannot be
printed.
Cover Open
Problem 1: The cover named in the second line of the printer operation panel display
is open.
Solution: Close the appropriate cover.
Media Misfeed
Problem 1: Paper or other print media did not feed.
Solution: Remove the sheet or stack, load it again, then press the Online button.
(ÆP.2-8)
Problem 2: Paper has jammed in the printer.
Solution: Remove the jammed sheet. (ÆP.7-20)
Problem 3: Transparency sheet (OHP film) could not feed from the paper cassette.
Solution: Place 1 sheet of plain paper under the bottom transparency, then set the
transparencies in the paper cassette. (ÆP.2 -11)