Filter
Top Products
Maintenance
16
6-16
Caution
Important
Important
11
Remove the old printhead.
z If the printer was operating before you started to remove the printhead,
allow the printer to cool for a few minutes. The metal parts of the printhead
become very hot during printing. To avoid minor burns, never touch the
metal parts of the printhead.
z Place the removed printhead in a plastic bag and seal the bag.
12
Hold the new printhead by its grips (a) and remove it from its case,
then remove the first orange protective cap (b). While pressing inward
on the tabs (d) of the second protective cap (c) as shown in the
illustration, pull down to remove.
z The nozzles under protective cap 2 (c) are covered with ink. Handle the printhead
carefully to avoid touching these nozzles or dropping the printhead and causing ink
stains.
z When handling the printhead, always hold it by the grips (a) on the left and right
sides of the printhead.
a
b
c
d
d