Filter
Top Products
30
Chapter 2 Connecting to a Computer
◆ Connecting a USB Interface Cable
Do not connect both a SCSI cable and USB interface cable at the same time.
SCSI Connectors
USB Connector
(Cannot be used at the
same time a SCSI
connector is in use.)
Connecting the Power Cord
Connect the power cord.
Be sure to use only the power cord provided with the scanner.
When connecting the power cord, follow these precautions. Failure to do so might
cause a fire or electrical shock.
■ Never grasp the plug when your hands are wet.
■ Never plug the scanner into a multiplug power strip.
■ Never bundle or tie the power cord around itself or another object. Connect the plug
securely to the power source.
■ Use only the power cord and plug provided with the scanner.
■ Before you connect the power cord, be sure to turn OFF the power.
■ Be sure to connect to an AC 220-240 V (50/60 Hz) power supply, according to your
region’s requirement.
■ Do not plug the scanner into an outlet shared with another device. If you use an
extension cord, pay attention to the total amperage of the cord.
CAUTION
WARNING