Filter
Top Products
27
ENGLISH
Location for attaching ferrite core
Attach the ferrite core to the SCSI cable connecting the scanner to the next SCSI
device.
SCSI Device
SCSI Device
SCSI Cable
DR-7080C
PC
Ferrite core
approx. 3 cm
Clamp the ferrite core on the SCSI cable approximately 3 cm from the connector
of the next SCSI device to be connected, closing it until you hear a clicking sound.
SCSI Connector
Ferrite core
approx. 3 cm
◆ Setting the SCSI ID and Terminator
Set the SCSI ID and the terminator on the DIP switches located between the
SCSI connectors and the USB connector.
Move the DIP switch up to turn it OFF and move it down to turn it ON.
SCSI ID
Terminator
SCSI ID
0
1
2
3
4
5
6
7
SW1
OFF
ON
OFF
ON
OFF
ON
OFF
ON
SW2
OFF
OFF
ON
ON
OFF
OFF
ON
ON
SW3
OFF
OFF
OFF
OFF
ON
ON
ON
ON
Set the SCSI ID referring to the table above.
Set unique SCSI IDs to any other built-in SCSI devices or SCSI devices
connected to the computer.
2.2 Connecting to a Computer