Filter
Top Products
7-2
Receiving Faxes Chapter 7
Different Ways to Receive a Fax
The LASER CLASS 2060P provides you with three different modes for
receiving faxes. To decide which mode will best suit your requirements,
consider how you want to use the LASER CLASS 2060P:
FAX/TEL AUTO SW
You can select Fax/Tel Mode, MANUAL MODE, or ANS. MACHINE
MODE in FAX/TEL AUTO SW.
FAX ONLY MODE
You can select FAX ONLY MODE, MANUAL MODE, or ANS.
MACHINE MODE in FAX ONLY MODE.
DRPD (Distinctive Ring Pattern Detection)
The DRPD feature of your LASER CLASS 2060P allows you to have two
or more telephone/fax numbers assigned to your LASER CLASS 2060P
using only one telephone line.
You can use this feature when you subscribe to a DRP service offered by
some telephone companies.
❏ Fax/Tel Mode
Use this mode if you will occasionally use the LASER CLASS 2060P
as a telephone. In this mode, if an incoming call is a fax, the LASER
CLASS 2060P then receives the fax automatically, without ringing; if
the call is from a telephone, the LASER CLASS 2060P rings to alert
you to pick up the handset or telephone to answer the call. This mode
is economical, in that it allows you to have phone and fax service
without the expense of an additional phone line.
This mode also includes settings that let you control precisely how it
handles incoming calls. To adjust these settings via the operation
panel, see page 7-5.
❏ MANUAL MODE
Use this mode if you will frequently use the LASER CLASS 2060P as
a telephone and want to answer every call yourself, including fax
calls. The LASER CLASS 2060P then rings for every call, whether
phone or fax, and you must press the Start/Copy button to begin
receiving a fax.
07.Chapter 7.fm Page 2 Tuesday, May 29, 2001 4:46 PM