Filter
Top Products
The Menu System
Chapter 15 The Menu System
15-11
3.INCOMING RING When the LASER CLASS 2060P is set to FAX ONLY MODE, set whether
the LASER CLASS 2060P rings when it receives a call.
OFF
The fax does not ring when it receives a fax.
ON The fax rings when it receives a fax if the handset or a telephone is
connected.
RING COUNT Set the number of incoming rings before the LASER CLASS 2060P
answers.
2
times (1 to 99)
4.MAN/AUTO SWITCH Set the LASER CLASS 2060P to switch to document receive mode after
ringing for a specified length of time in the manual receive mode.
OFF
The fax will keep ringing until someone answers the call manually with the
handset or a connected extension telephone.
ON F/T RING TIME Set the length of time to elapse before the LASER
CLASS 2060P switches to document receiving.
15
SEC (1 to 99)
5.REMOTE RX Receive from a remote telephone with preset setting.
ON Remote receiving is turned on.
REMOTE RX ID You can dial a number code on the remote extension to
start receiving a document.
25
(0 to 99)
OFF Remote receiving is turned off.
6.MEMORY RX Select how incoming documents are to be received in the memory if the fax
runs out of toner or paper, or the face-down output tray is full of printed
pages.
ON Remainder of the fax is stored in the memory and can be printed out as
soon as your re-fill the paper cassette, change the toner cartridge, clear the
paper jam, or pick up the printed pages from the face-down output tray.
OFF Memory receiving is turned off. If the fax runs out of toner or recording paper
during a document reception, or the face-down output tray is full of printed
pages, the remainder of the document is not saved in the memory. The other
party must re-send the document.
(Default settings are shown in
bold
type)
RX SETTINGS