Filter
Top Products
1-12
Introducing the LASER CLASS 2060P Chapter 1
Safety Instructions
Read these safety instructions thoroughly before using your
LASER CLASS 2060P, and keep them handy in case you need to refer to
them later.
Except as specifically described in this user’s guide, do not attempt to
service the LASER CLASS 2060P yourself. Never attempt to disassemble
the unit: opening and removing its interior covers will expose you to
dangerous voltages and other risks. For all service, contact your local
authorized Canon Facsimile Dealer.
❏ Always follow all warnings and instructions marked on the
LASER CLASS 2060P.
❏ Use the LASER CLASS 2060P only on a sturdy, stable, level surface. If
the unit falls, it could be seriously damaged.
❏ Do not use the LASER CLASS 2060P near water. If you spill liquid on
or into the unit, unplug it immediately and call your local authorized
Canon Facsimile Dealer.
❏ The back of the LASER CLASS 2060P includes slots and openings for
ventilation. To keep the LASER CLASS 2060P from overheating
(which can cause it to operate abnormally and create a fire risk), take
care not to block or cover these openings. Do not operate the unit on a
bed, sofa, rug, or other similar soft surface, or near a radiator or other
heat source. Do not place the LASER CLASS 2060P in a closet or
cabinet or on shelves unless adequate ventilation is available. See
“Choosing a Location for Your LASER CLASS 2060P” on page 2-3 for
guidelines on how much space the unit needs for ventilation.
❏ Operate the LASER CLASS 2060P only from the type of power source
indicated on the unit’s label. If you are unsure of the type of power
available from your wall outlets, contact your local power company.
❏ Make sure the total amperage used by all devices plugged into the
wall outlet does not exceed the ampere rating of the outlet's circuit
breaker.
❏ Do not allow anything to rest on the power cord and do not place the
LASER CLASS 2060P where the cord will be walked on. Make sure
the cord is not knotted or kinked.
C