Filter
Top Products
Glossary
G
-
7
Glossary
Numeric buttons
The round, numbered buttons on the operation panel marked the same as
a standard telephone keypad. Press them to perform regular dialing. You
also use the numeric buttons to enter numbers and letters when you
register numbers and names, and for entering coded speed dialing codes.
O
One-Touch Speed Dialing
An automatic dialing method that allows you to dial a fax or telephone
number by pressing a single One-Touch Speed Dialing button. The
LASER CLASS 2060P can store up to 32 numbers for One-Touch Speed
Dialing.
One-Touch Speed Dialing buttons
The buttons numbered 1 to 32 on the operation panel of the LASER
CLASS 2060P, each of which may be registered as a fax or telephone
number. Once a number is registered, you press one button to dial the
entire number.
P
Paper feed
Refers to guiding a sheet of paper into the unit’s paper path.
Parallel interface
An interface that transmits multiple bits simultaneously (usually in one-
byte segments). Your LASER CLASS 2060P has a built-in, Centronics-type
bi-directional parallel interface. See also Interface port.
Pause
A timing entry required for registering certain long distance numbers and
for dialing out through some telephone systems or switchboards.
Pressing the Pause button enters a pause between digits of a telephone
number.
Photo
The document setting you use for sending or copying documents with
intermediate tones, such as photographs.