Filter
Top Products
Setting Up Your
LASER CLASS
2060P
Chapter 2 Setting Up Your LASER CLASS 2060P
2-19
Making Connections
Connecting the Telephone Line
You need an RJ11-C type (modular) wall jack to connect the LASER
CLASS 2060P to your telephone system. This is a standard wall jack. If
you do not have this type of jack, contact your local telephone company
to have one installed.
Connect the LASER CLASS 2060P to a telephone line as follows:
1. Connect one end of the supplied telephone line to the jack marked
on the left side of the LASER CLASS 2060P.
2. Connect the other end of the line to your wall telephone jack.