Filter
Top Products
COPYRIGHT
©
2001 CANON INC. 2000 2000 2000 2000 CANON iR2200/iR2800/iR3300 REV.0 MAR. 2001
CHAPTER 5 PICK-UP/FEEDING SYSTEM
5-49 P
9.3 Feeding Assembly
9.3.1 Removing the Feeding Assembly
1) Remove the cassette 1/2.
2) Remove the pickup assembly. (p. 5-
37P)
3) Remove the delivery cover. (p. 6-12P)
4) Disconnect the concoctor [1] of the
lower feeding assembly from the left.
F05-903-01
5) Remove the inside cover. (p. 7-14P)
6) Mount the feeding locking lever [1]
temporarily, and lock the feeding as-
sembly [2] in place.
7) Remove the pin [3], and detach the du-
plex grip [4].
8) Remove the two screws [5], and detach
the lower feeding assembly [6] from be-
low.
F05-903-02
9) Turn the feeding locking lever [1] to re-
lease the feeding assembly [2].
10) Disconnect the connector [3], and de-
tach the sensor cable [4] from the three
wire saddles [5] and the hinge [6].
11) Remove the screw [7], and detach the
hinge pin [6].
12) While taking care not to trip them on
the flapper [8] and the like, detach the
feeding assembly [2] to the front.
F05-903-03
[1]
[1]
[5]
[4]
[3] [2] [6]
[5]
[1]
[2]
[6]
[5]
[5]
[4]
[5]
[7]
[3]
[8]