Filter
Top Products
COPYRIGHT
©
2001 CANON INC. 2000 2000 2000 2000 CANON iR2200/iR2800/iR3300 REV.0 MAR. 2001
CHAPTER 3 STANDARDS AND ADJUSTMENTS
3-6 T
1.6 Adjusting the Leading Edge Non-Image Width
1) Adjust the non-image width in service mode so that it is as indicated:
COPIER>ADJUST>ADJ-XY>ADJ-X.
F03-106-01
2 Scanning System
2.1 After Replacing the Scanning Lamp
Execute ‘CCD auto adjust’ in service
mode, and record the updated CCD adjust-
ment data on the service label.
1. CCD Auto Adjust
COPIER>FUNCTION>CCD>
CCD-ADJ
2. CCD Adjustment Data
All items under
COPIER>ADJUST>CCD.
Image leading edge
Decreasing the ADJ-X setting
(A decrease by '12' will decrease the width by 1 mm.)
Increasing the ADJ-X setting
(An increase by '12' will increase the width by 1 mm.)