Filter
Top Products
COPYRIGHT
©
2001 CANON INC. 2000 2000 2000 2000 CANON iR2200/iR2800/iR3300 REV.0 MAR. 2001
CHAPTER 5 SERVICE MODE
5-60 T
PNCH-Y
Use it to adjust the punch hole position (front/rear of paper) when the
puncher unit is in use.
• A higher setting shifts the punch hole toward the front of paper.
Range of -5 to +5 (in mm)
adjustment
Using the Mode
1) Make a print of the Test Chart, and check the position of the hole.
2) Select the item, and change the setting to adjust.
3) Press the OK key.
4) Make a print of the Test Chart once again, and check to make sure that
the hole position is as indicated.
F05-403-02
Feed direction
Higher setting
Lower setting
Paper
SORTER>ADJUST