Filter
Top Products
COPYRIGHT
©
2001 CANON INC. 2000 2000 2000 2000 CANON iR2200/iR2800/iR3300 REV.0 MAR. 2001
CHAPTER 5 SERVICE MODE
5-46 T
<ADJ-XY>
Use it to adjust the image read start position.
If you have cleared the RAM on the reader controller PCB and replaced the PCB, use it to
enter the settings indicated on the service label.
ADJ-X
Use it to adjust the scanner image leading edge (x direction).
Range of 250 to 290 (‘1’ being 0.1mm)
adjustment
Caution Be sure to execute it before adjusting the margin.
Do not use this mode to create a margin.
F05-401-03
ADJ-Y
Use it to adjust the CCD read start position (X direction).
Range of 100 to 400 (‘1’ being 0.1 mm)
adjustment
F05-401-04
Vertical side plate
Standard white plate
Higher setting
Lower setting
Copyboard glass
Lower setting
Higher setting
Original
Vertical size plate
Read start position
COPIER>ADJUST>ADJ-XY