Filter
Top Products
3) Place a newspaper or the like on the floor or a desk top, and pour out the toner from
the developing assembly.
4) Remove the two screws e, and remove the blade assembly* r.
* consisting of the blade and its mount.
Figure 4-331
3. Removing the Developing Cylinder Side Seal
1) Remove the developing assembly from the copier.
2) Remove the blade assembly.
Caution:
The blade must be installed at high precision. Do not remove it in the field. If
necessary, remove it intact on its mounting plate.
3) Remove the screw q, and remove the front cover w.
Figure 4-332
COPYRIGHT
©
1997 CANON INC. CANON NP6218 REV. 0 MAY 1997 PRINTED IN JAPAN (IMPRIME AU JAPON)
CHAPTER 4 IMAGE FORMATION SYSTEM
4-48
e
r
q
w