Filter
Top Products
COPYRIGHT
©
1997 CANON INC. CANON NP6218 REV. 0 MAY 1997 PRINTED IN JAPAN (IMPRIME AU JAPON)
CHAPTER 10 TROUBLESHOOTING
10-17
6) Tighten the screw on the pulley.
7) Detach the positioning tool (FY9-3009).
3. Adjusting the Scanner Cable Tension
Move the tension plate and tighten the screw w so that the distance across the ends
of the cable spring q is 34 ±1 mm as indicated in Figure 10-216.
Figure 10-216
4. Assembling the Mirror Positioning Tool
1) Remove the screw found in position B.
Figure 10-217
2) Fit the screw removed in step 1) in position A, and tighten it slightly.
3) Extend the arm accommodated by the main frame unit it butts against the stopper as
in Figure 10-218.
q
w
34±1mm
A
A
B
B
Position B
Longest pin
Medium-Length pin