Filter
Top Products
CHAPTER 10 TROUBLESHOOTING
10-107
COPYRIGHT
©
1997 CANON INC. CANON NP6218 REV. 0 MAY 1997 PRINTED IN JAPAN (IMPRIME AU JAPON)
G. Specification Settings Mode [5]
• To activate specification settings mode, press [5] on the keypad and then the AE key.
• To select an item, press the appropriate key on the keypad and then the Start key.
• To change the setting, press the appropriate keys on the keypad and then the AE key.
• To clear an item, press the Clear key.
• A press on the Start key executes the respective operation.
Table 10-17
No.
501
502
503
504
505
506
507
508
Description
Characteristics storage for
multifeeder paper width sensor
Copy density notation switching
(9/17 steps)
Auto power-off cancel
Copy count upper limit
Universal cassette paper size
Separation static eliminator output
voltage switching
Fixing forced wait
Fixing control temperature
switching
Remarks
See p. 10-43.
9 steps: 0
17 steps: 1
default: 0 (9 steps)
• When ‘1’ is entered on the keypad, the
notation will be ‘ON’, activating the auto
power-off function.
• When ‘0’ is entered on the keypad, the
notation will be ‘OFF’, de-activating the auto
power-off function.
default: on.
The auto power-off period is set in user mode;
since the copier’s WAIT time is 0, it is best to
keep the auto power-off mechanism to be
enabled.
settings:0 to 99
default: 0
When set to ‘0’, the upper limit will be 100
copies.
See p. 10-44.
settings:0 to 14
default: 0
002: 2.5 kV
004: 4 kV
default: 0
When activated, the period of initial rotation is
increased; activate it if the fixing on the first copy
is poor because of low temperature conditions.
0: disabled
1: enabled
default: 0
001: 225°C See p. 10-32.
002: 215°C
003: 200°C
default: 002