CHAPTER 10 TROUBLESHOOTING
10-94
COPYRIGHT
©
1997 CANON INC. CANON NP6218 REV. 0 MAY 1997 PRINTED IN JAPAN (IMPRIME AU JAPON)
Item
[1]
[
2]
[
3]
[
4]
[
5]
[
6]
Description
control display mode
I/O display mode
adjustment mode
operation/inspection mode
specification mode
counter mode
VII. SERVICE MODE
A. Outline
The copier’s service mode may be classified into the following six:
Table 10-701
B. Using Service Mode
1. Activating Service Mode
1) Open the front door, and insert the door switch actuator.
• If you want to make checks for I/O display mode or the like while making copies,
set the copy mode.
2) Press the service mode switch (SW302) on the DC controller with hex key.
• The copy count indicator indicates [1].
• While service mode is activated, the copy density indicator LED indicates the
position of the fixing belt.
• A press on the reset key de-activates service mode.
Figure 10-701