Filter
Top Products
E. Fixing System
1. Points to Note When Attaching the Fixing Film
Orient it so that the cut-off is toward the rear.
Make sure that the end toward the front is along the middle groove.
Figure 10-234
2. Points to Note When Attaching the Heater Connector
• When attaching the heater connector to the fixing heater, take care not to damage
the heater.
• When tightening the screw, hold the connector making sure that both its top and
bottom are free of pressure; do not tighten the screw excessively.
Figure 10-235
10-27
CHAPTER 10 TROUBLESHOOTING
COPYRIGHT
©
1997 CANON INC. CANON NP6218 REV. 0 MAY 1997 PRINTED IN JAPAN (IMPRIME AU JAPON)
Film end aligned.
Screw
Heater connector