Filter
Top Products
CASIO
5-10
u To pan the screen
1. While the graph screen is on the display, press K2(PAN).
• This enters the Pan mode and displays a pointer (
) in the center of the screen.
2. Move the pointer to the location on the screen you want to grab and then press w.
• This causes the pointer to change from
to .
3. Use the cursor keys to shift the screen in the direction you want.
• In the Pan mode, each press of w toggles the shape of the pointer between
and .
While the pointer is on the display, you can use the cursor keys to move it to another
location on the screen. Pressing the cursor keys while the pointer is on the display will
shift (pan) the screen contents.
4. To exit the Pan mode, press J.
k Displaying a Graph Background Image
You can configure the calculator so a particular image is always displayed as the graph
background image. Use the “Background” setting on the Setup screen to specify the
background image. The following describes the types of files that can be used as the
background image.
• A file saved using the procedure under “Saving Graph Screen Contents as an Image (g3p
File)” (page 5-21)
• A file described under “Managing Picture Plot Files” (page 15-5)
u To select the graph background image
1. From the Main Menu, enter the Graph mode.
2. Press !m(SET UP) to display the Setup screen.
3. Use f and c to move the highlighting to “Background” and then press 2(PICT n),
3(OPEN), or 1(None).
• If you do not want to display a background image on the graph screen, press 1(None)
and then advance to step 6.
• To display a list of g3p files stored in the PICT folder in storage memory, press
2(PICT n).
• To display a list of g3p files stored in the PICT folder in the storage memory root directory,
press 3(OPEN). In this case, use f and c if required to move the highlighting to the
folder that contains the image you want to use and then press 1(OPEN).
4. Use f and c to move the highlighting to the file you want to use and then press
1(OPEN).