Filter
Top Products
Chapter 2 Fault Descriptions
Access Point Faults
2-14
FAQ and Troubleshooting Guide for the CiscoWorks Wireless LAN Solution Engine
Retry Count rate is
Overloaded number
per minute
Non-IOS
and IOS
The fault threshold
set for the
overloaded state
has been exceeded.
When the fault is
cleared, the
following message
displays: Retry
Count rate is OK
Manage Fault
Settings >
Thresholds >
Access Point >
Max Retry
Counts
Verify that the fault
threshold is set correctly.
If the threshold is set
correctly, review your
network to determine the
action necessary to clear
the fault condition.
RF bandwidth
utilization is
Degraded
(utilization %)
Non-IOS
and IOS
The fault threshold
set for the degraded
state has been
exceeded.
When the fault is
cleared, the
following message
displays: RF
bandwidth
utilization is OK
Manage Fault
Settings >
Thresholds >
Access Point >
RF Port
Utilization
Verify that the fault
threshold is set correctly.
If the threshold is set
correctly, review your
network to determine the
action necessary to clear
the fault condition.
RF bandwidth
utilization is
Overloaded
(utilization %)
Non-IOS
and IOS
The fault threshold
set for the
overloaded state
has been exceeded.
When the fault is
cleared, the
following message
displays: RF
bandwidth
utilization is OK
Manage Fault
Settings >
Thresholds >
Access Point >
RF Port
Utilization
Verify that the fault
threshold is set correctly.
If the threshold is set
correctly, review your
network to determine the
action necessary to clear
the fault condition.
Table 2-1 Access Point Faults (continued)
Fault Description Type Explanation Related Setting Recommended Action