Filter
Top Products
2-15
FAQ and Troubleshooting Guide for the CiscoWorks Wireless LAN Solution Engine
Chapter 2 Fault Descriptions
Access Point Faults
SNMP query received
authorization error
response
Non-IOS The access point's
user community
strings do not have
Admin, Ident,
Firmware, SNMP
privileges. The
WLSE might not be
able to access some
SNMP information
from the access
point that requires
these privileges.
When the fault is
cleared, the
following message
displays: Device
was reachable via
SNMP.
Manage Fault
Settings >
Thresholds >
Access Point >
SNMP
Reachable
Make sure the SNMP
community string set on
the WLSE (Devices >
Discover > Device
Credentials > SNMP
Communities) is the same
as the string set on the
access point (Setup >
Security > User
Information).
Table 2-1 Access Point Faults (continued)
Fault Description Type Explanation Related Setting Recommended Action