Filter
Top Products
2-19
FAQ and Troubleshooting Guide for the CiscoWorks Wireless LAN Solution Engine
Chapter 2 Fault Descriptions
Access Point Faults
WEP key length
policy violation
Non-IOS
and IOS
The WEP key
length setting has
been violated.
When this fault has
been cleared, the
following message
displays: WEP key
length is OK.
Manage Fault
Settings >
Security
Policies > WEP
Key Length
Check the WEP key
settings on the access
point to make sure they
match the WLSE settings.
WNM failed to
authenticate with
WDS.
IOS Authentication
required to open a
WLCCP channel
between the WLSE
and the WDS
failed.
Manage Fault
Settings >
Thresholds >
WDS >
Authentication
Failures
Verify that the WLSE
credentials used to
authenticate with the
WDS are correct.
For more information, see
the managing devices
information in the online
help or the User Guide for
the CiscoWorks Wireless
LAN Solution Engine,
Release 2.5.
Table 2-1 Access Point Faults (continued)
Fault Description Type Explanation Related Setting Recommended Action