Filter
Top Products
Chapter 2 Fault Descriptions
Access Point Faults
2-16
FAQ and Troubleshooting Guide for the CiscoWorks Wireless LAN Solution Engine
SSID policy violation
SSID assigned to the
access point
Non-IOS
and IOS
The SSID entered
in the WLSE is
different from the
SSID assigned to
the access point.
When the fault is
cleared, the
following message
displays: SSID is
valid.
Manage Fault
Settings >
Security
Policies >
SSID
If you configured
different SSIDs among
managed access points,
you need to enter all of the
SSIDs, or this fault will be
generated for access
points whose SSIDs are
not listed.
The access point is
configured with an
unauthorized SSID.
Make sure that you have
entered authorized SSIDs
in the SSID policy.
Change the SSID on the
access point to an
authorized SSID.
IOS The SSID policy for
an IOS access point
is enabled, but the
“guest mode” is
disabled. This
causes the access
point to send an
SSID made up of all
zeros and equivalent
to the length of the
first configured
SSID.
Manage Fault
Settings >
Security
Policies >
SSID
Enable the access point’s
guest mode.
Table 2-1 Access Point Faults (continued)
Fault Description Type Explanation Related Setting Recommended Action