![](http://pdfasset.owneriq.net/0/05/0053e0c3-5eaa-4d2d-93c0-1b54655b7b7b/0053e0c3-5eaa-4d2d-93c0-1b54655b7b7b-bg9a.png)
5-18
Cisco ASA Series Firewall ASDM Configuration Guide
Chapter 5 Configuring Twice NAT (ASA 8.3 and Later)
Configuring Twice NAT
Step 9 Click OK.
Configuring Static NAT or Static NAT-with-Port-Translation
This section describes how to configure a static NAT rule using twice NAT. For more information about
static NAT, see the “Static NAT” section on page 3-3.
Detailed Steps
To configure static NAT, perform the following steps:
Step 1 Choose Configuration > Firewall > NAT Rules, and then click Add.
If you want to add this rule to section 3 after the network object rules, then click the down arrow next to
Add, and choose Add NAT Rule After Network Object NAT Rules.
The Add NAT Rule dialog box appears.