Filter
Top Products
8-51
User Guide for Cisco Secure Access Control System 5.4
OL-26225-01
Chapter 8 Managing Users and Identity Stores
Managing External Identity Stores
• Save Changes to save the configuration.
• Discard Changes to discard all changes.
• If AD is already configured and you want to delete it, click Clear Configuration after you verify
the following:
–
There are no policy rules that use custom conditions based on the AD dictionary.
–
The AD is not chosen as the identity source in any of the available access services.
–
There are no identity store sequences with the AD.
The Active Directory configuration is saved. The Active Directory page appears with the new
configuration.
Note The Centrify configuration is affected (and sometimes gets disconnected) when there is a slow response
from the server while you test the ACS connection with the AD domain. However the configuration
works fine with the other applications.
Note Due to NETBIOS limitations, ACS hostnames must contain less than or equal to 15 characters.
Joining Nodes to an AD Domain
To join a single node or multiple nodes to an AD Domain, complete the following steps:
Step 1 Select Users and Identity Stores > External Identity Stores > Active Directory.
The Active Directory page appears.
Step 2 Select a single node or multiple nodes and click Join/Test Connection.
The Join/Test Connection page appears.
Step 3 Complete the fields in the Join/Test Connection page as described in Table 8-11.