Filter
Top Products
18-5
User Guide for Cisco Secure Access Control System 5.4
OL-26225-01
Chapter 18 Managing System Administration Configurations
Managing Dictionaries
Step 3 Click Submit to configure the RSA SecurID Prompts.
Managing Dictionaries
The following tasks are available when you select System Administration > Configuration >
Dictionaries:
• Viewing RADIUS and TACACS+ Attributes, page 18-5
• Configuring Identity Dictionaries, page 18-10
Viewing RADIUS and TACACS+ Attributes
The RADIUS and TACACS+ Dictionary pages display the available protocol attributes in these
dictionaries:
• RADIUS (IETF)
• RADIUS (Cisco)
• RADIUS (Microsoft)
• RADIUS (Ascend)
• RADIUS (Cisco Airespace)
• RADIUS (Cisco Aironet)
Table 18-6 RSA SecurID Prompts Page
Option Description
Passcode Prompt Text string to request for the passcode. The default value is “Enter
PASSCODE:”.
Next Token Prompt Text string to request for the next token. The default value is “Enter Next
TOKENCODE:”.
Choose PIN Type Prompt Text string to request the PIN type. The default value is “Do you want to
enter your own pin?”.
Accept System PIN Prompt Text string to accept the system-generated PIN. The default value is “ARE
YOU PREPARED TO ACCEPT A SYSTEM-GENERATED PIN?”.
For the two PIN entry prompts below, if the prompt contains the following strings, they will be substituted as follows:
• {MIN_LENGTH}—will be replaced by the minimum PIN length configured for the RSA realm.
• {MAX_LENGTH}—will be replaced by the maximum PIN length configured for the RSA realm.
• /x/—to cancel the new PIN procedure.
Alphanumeric PIN Prompt Text string for requesting an alphanumeric PIN.
Numeric PIN Prompt Text string for requesting a numeric PIN.
Re-Enter PIN Prompt Text string to request the user to re-enter the PIN. The default value is
“Reenter PIN:”.