Filter
Top Products
13-15
User Guide for Cisco Secure Access Control System 5.4
OL-26225-01
Chapter 13 Managing Reports
Working with Catalog Reports
Identity Group Enter an identity group name or click Select to enter a valid identity group name on which to run your
report.
Device Name Enter a device name or click Select to enter a valid device name on which to run your report.
Device IP Enter a device IP address or click Select to enter a valid device IP address on which to run your report.
SNMP Community Configure SNMP preferences to authenticate access to MIB objects. For more information, see
Configuring SNMP Preferences, page 15-16. This community string is used by ACS to query
information using SNMP on AAA client, and cannot used by SNMP manager to query MIB
information on ACS.
Device Group Enter a device group name or click Select to enter a valid device group name on which to run your
report.
Access Service Enter an access service name or click Select to enter a valid access service name on which to run your
report
Identity Store Enter an identity store name or click Select to enter a valid identity store name on which to run your
report.
ACS Instance Enter an ACS instance name or click Select to enter a valid ACS instance name on which to run your
report.
Failure Reason Enter a failure reason name or click Select to enter a valid failure reason name on which to run your
report.
Protocol Use the drop down list box to select which protocol on which you want to run your report. Valid options
are:
• RADIUS
• TACACS+
Authentication
Status
Use the drop down list box to select which authentication status on which you want to run your report.
Valid options are:
• Pass Or Fail
• Pass
• Fail
Radius Audit
Session ID
Enter the RADIUS audit session identification name on which you want to run a report.
ACS Session ID Enter the ACS session identification name on which you want to run a report.
Severity Use the drop down list box to select the severity level on which you want to run a report. This setting
captures the indicated severity level and those that are higher within the threshold. Valid options are:
• Fatal
• Error
• Warning
• Info
• Debug
End Point IP
Address
Enter the end point IP address on which you want to run a report.
Table 13-5 <report_name> Page (continued)
Option Description