Filter
Top Products
13-19
User Guide for Cisco Secure Access Control System 5.4
OL-26225-01
Chapter 13 Managing Reports
Working with Catalog Reports
Figure 13-3 CoA Options
Step 4 Click Run to reauthenticate or disconnect the RADIUS session.
If your change of authorization fails, it might be because of any of the following reasons:
• Device does not support CoA
• Changes to the identity or authorization policy
• Shared secret mismatch
Step 5 See the Troubleshooting RADIUS Authentications, page 14-6 to troubleshoot a failed change of
authorization attempt.
A failed dynamic CoA will be listed under failed RADIUS authentications.
Customizing Reports
To customize a system report:
Step 1 Select Monitoring and Reports > Reports > Catalog > report_type > report_name, where report_type
is the type of report, and report_name is the name of the report that you want to customize.
The Reports page appears.
Step 2 Click the radio button next to the name of the report you want to customize, or click the name of the
report you want to customize.
Step 3 Click Run.
The Run Report page appears.
Step 4 Modify fields in the Run Reports page as required.
Step 5 Click Run.
The report appears.
Step 6 Click Launch Interactive Viewer.
Step 7 Modify the report contents as required and click Save As to save the customized report with the same,
or a different, report name in any Catalog > Reports page.