Filter
Top Products
18-22
User Guide for Cisco Secure Access Control System 5.4
OL-26225-01
Chapter 18 Managing System Administration Configurations
Configuring Logs
Step 1 Select System Administration > Configuration > Log Configuration > Remote Log Targets.
The Remote Log Targets page appears.
Step 2 Do one of the following:
• Click Create.
• Check the check box next to the remote log target that you want to duplicate and click Duplicate.
• Click the name of the remote log target that you want to modify; or check the check box next to the
name of the remote log target that you want to modify and click Edit.
One of these pages appears:
• Remote Log Targets > Create, if you are creating a new remote log target.
• Remote Log Targets > Duplicate: “log_target”, where log_target is the name of the remote log target
you selected in Step 2, if you are duplicating a remote log target.
• Remote Log Targets > Edit: “log_target”, where log_target is the name of the remote log target you
selected in Step 2, if you are modifying a remote log target.
Step 3 Complete the required fields as described in Table 18-19:
Table 18-19 Remote Log Targets Configuration Page
Option Description
General
Name Name of the remote log target. Maximum name length is 32 characters.
Description Description of the remote log target. Maximum description length is 1024 characters.
Type Type of remove log target—Syslog (the only option).
Target Configuration
IP Address IP address of the remote log target, in the format x.x.x.x.
Use
Advanced
Syslog
Options
Click to enable the advanced syslog options—port number, facility code, and
maximum length.
Port Port number of the remote log target used as the communication channel between the
ACS and the remote log target (default = 514). This option is only visible if you click
Use Syslog Options.