Cisco Systems IOS XR Laptop User Manual


 
Implementing IS-IS on Cisco IOS XR Software
Configuration Examples for Implementing IS-IS on Cisco IOS XR Software
RC-122
Cisco IOS XR Routing Configuration Guide
Configuration Examples for Implementing IS-IS on Cisco IOS XR
Software
This section provides the following configuration examples:
Configuring Single-Topology IS-IS for IPv6: Example, page RC-122
Configuring Multitopology IS-IS for IPv6: Example, page RC-123
Redistributing IS-IS Routes Between Multiple Instances: Example, page RC-123
Configuring Single-Topology IS-IS for IPv6: Example
The following example shows single-topology mode being enabled, an IS-IS instance being created, the
NET being defined, IPv6 being configured along with IPv4 on an interface, and IPv4 link topology being
used for IPv6.
This configuration allows POS interface 0/3/0/0 to form adjacencies for both IPv4 and IPv6 addresses.
router isis isp
net 49.0000.0000.0001.00
address-family ipv6 unicast
single-topology
interface POS0/3/0/0
Step 10
set-attached-bit
Example:
RP/0/RP0/CPU0:router(config-isis-af)#
set-attached-bit
(Optional) Configures an IS-IS instance with an attached bit
in the Level 1 LSP.
Step 11
end
or
commit
Example:
RP/0/RP0/CPU0:router(config-isis-af)# end
or
RP/0/RP0/CPU0:router(config-isis-af)# commit
Saves configuration changes.
When you issue the end command, the system prompts
you to commit changes:
Uncommitted changes found, commit them before
exiting(yes/no/cancel)?
[cancel]:
Entering yes saves configuration changes to the
running configuration file, exits the configuration
session, and returns the router to EXEC mode.
Entering no exits the configuration session and
returns the router to EXEC mode without
committing the configuration changes.
Entering cancel leaves the router in the current
configuration session without exiting or
committing the configuration changes.
Use the commit command to save the configuration
changes to the running configuration file and remain
within the configuration session.
Command or Action Purpose