Filter
Top Products
Implementing OSPF on Cisco IOS XR Software
How to Implement OSPF on Cisco IOS XR Software
RC-151
Cisco IOS XR Routing Configuration Guide
9. neighbor ip-address [priority number] [poll-interval seconds] [cost number]
or
neighbor ipv6-link-local-address [priority number] [poll-interval seconds] [cost number]
[database-filter [all]]
10. Repeat Step 9 for all neighbors on the interface.
11. exit
12. interface type instance
13. neighbor ip-address [priority number] [poll-interval seconds][cost number] [database-filter
[all]]
or
neighbor ipv6-link-local-address [priority number] [poll-interval seconds][cost number]
[database-filter [all]]
14. Repeat Step 13 for all neighbors on the interface.
15. end
or
commit
DETAILED STEPS
Command or Action Purpose
Step 1
configure
Example:
RP/0/RP0/CPU0:router# configure
Enters global configuration mode.
Step 2
router ospf
process-name
or
router ospfv3
process-name
Example:
RP/0/RP0/CPU0:router(config)# router ospf 1
or
RP/0/RP0/CPU0:router(config)# router ospfv3 1
Enables OSPF routing for the specified routing process, and
places the router in router configuration mode.
or
Enables OSPFv3 routing for the specified routing process,
and places the router in router ospfv3 configuration mode.
Note The process-name argument is any alphanumeric
string no longer than 40 characters.
Step 3
router-id {
ipv4-address
|
interface-type
interface-instance
}
Example:
RP/0/RP0/CPU0:router(config-ospf)# router-id
192.168.4.3
Configures a router ID for the OSPF process.
Note We recommend using a stable IP address as the
router ID.
Step 4
area
area-id
Example:
RP/0/RP0/CPU0:router(config-ospf)# area 0
Enters area configuration mode and configures an area for
the OSPF process.
• This example configures a backbone area.
• The area-id argument can be entered in dotted-decimal
or IPv4 address notation, such as area 1000 or
area 0.0.3.232. However, you must choose one form or
the other for an area. We recommend using the IPv4
address notation.