Filter
Top Products
Implementing BGP on Cisco IOS XR Software
How to Implement BGP on Cisco IOS XR Software
RC-68
Cisco IOS XR Routing Configuration Guide
4. address-family {ipv4 unicast | ipv4 multicast | ipv6 unicast | ipv6 multicast}
5. soft-reconfiguration inbound always
6. end
or
commit
DETAILED STEPS
Command or Action Purpose
Step 1
configure
Example:
RP/0/RP0/CPU0:router# configure
Enters global configuration mode.
Step 2
router bgp
autonomous-system-number
Example:
RP/0/RP0/CPU0:router(config)# router bgp 120
Enters BGP configuration mode allowing you to configure
the BGP routing process.
Step 3
neighbor
ip-address
Example:
RP/0/RP0/CPU0:router(config-bgp)# neighbor
172.168.40.24
Places the router in neighbor configuration mode for BGP
routing and configures the neighbor IP address
172.168.40.24 as a BGP peer.
Step 4
address-family {ipv4 unicast | ipv4 multicast |
ipv6 unicast | ipv6 multicast}
Example:
RP/0/RP0/CPU0:router(config-bgp-nbr)#
address-family ipv4 unicast
Enters neighbor address family configuration mode for the
IPv4 address family.