Filter
Top Products
Implementing and Monitoring RIB on Cisco IOS XR Software
How to Deploy and Monitor RIB
RC-199
Cisco IOS XR Routing Configuration Guide
5. show route [afi-all | ipv4 | ipv6] [unicast | multicast | safi-all] local [interface]
6. show route [afi-all | ipv4 | ipv6] [unicast | multicast | safi-all] ip-address mask longer-prefixes
7. show route [afi-all | ipv4 | ipv6] [unicast | multicast | safi-all] next-hop ip-address
DETAILED STEPS
Command or Action Purpose
Step 1
show route [
protocol
[
instance
]] [afi-all |
ipv4 | ipv6] [unicast | multicast | safi-all]
[
ip-address
[
mask
]]
Example:
RP/0/RP0/CPU0:router# show route list list1 bgp
aspo ipv4 unicast 192.168.111/8
Displays the current routes in RIB.
Step 2
show route [afi-all | ipv4 | ipv6] [unicast |
multicast | safi-all] backup [
ip-address
]
Example:
RP/0/RP0/CPU0:router# show route ipv4 unicast
backup 192.168.111/8
Displays backup routes in RIB.
Step 3
show route [afi-all | ipv4 | ipv6] [unicast |
multicast | safi-all] best-local
ip-address
Example:
RP/0/RP0/CPU0:router# show route ipv4 unicast
best-local 192.168.111/8
Displays the best-local address to use for return packets
from the given destination.
Step 4
show route [afi-all | ipv4 | ipv6] [unicast |
multicast | safi-all] connected
Example:
RP/0/RP0/CPU0:router# show route ipv4 unicast
connected
Displays the current connected routes of the routing table.
Step 5
show route [afi-all | ipv4 | ipv6] [unicast |
multicast | safi-all] local [
interface
]
Example:
RP/0/RP0/CPU0:router# show route ipv4 unicast
local
Displays local routes for receive entries in the routing table.