Cisco Systems IOS XR Laptop User Manual


 
Implementing BGP on Cisco IOS XR Software
How to Implement BGP on Cisco IOS XR Software
RC-37
Cisco IOS XR Routing Configuration Guide
4. end
or
commit
DETAILED STEPS
Command or Action Purpose
Step 1
configure
Example:
RP/0/RP0/CPU0:router# configure
Enters global configuration mode.
Step 2
router bgp
autonomous-system-number
Example:
RP/0/RP0/CPU0:router(config)# router bgp 120
Enters BGP configuration mode allowing you to configure
the BGP routing process.
Step 3
default-metric
value
Example:
RP/0/RP0/CPU0:router(config-bgp)# default
metric 10
Sets the default metric to 10, which is used to set the MED
to advertise to peers for routes that do not already have a
metric set (routes that were received with no MED
attribute).
Step 4
end
or
commit
Example:
RP/0/RP0/CPU0:router(config-bgp)# end
or
RP/0/RP0/CPU0:router(config-bgp)# commit
Saves configuration changes.
When you issue the end command, the system prompts
you to commit changes:
Uncommitted changes found, commit them before
exiting(yes/no/cancel)?
[cancel]:
Entering yes saves configuration changes to the
running configuration file, exits the configuration
session, and returns the router to EXEC mode.
Entering no exits the configuration session and
returns the router to EXEC mode without
committing the configuration changes.
Entering cancel leaves the router in the current
configuration session without exiting or
committing the configuration changes.
Use the commit command to save the configuration
changes to the running configuration file and remain
within the configuration session.