Filter
Top Products
D–2 Troubleshooting Guide
Setting up Analog/Digital Audio Output
7. In the Configuration area of the Settings tab, change the Output
Mode to the desired setting.
8. Click OK to close the Properties panel.
9. Close the System Properties panel.
10. Close the Control Panel.
Microsoft Windows NT 4.0
1. Click Start > Settings > Control Panel and double-click the
Multimedia icon to open the Multimedia Properties panel.
2. Select the Device tab at the top of the panel.
3. Click the “+” next to the “Audio Devices” to expand it.
4. Click the appropriate audio device to highlight it.
5. Click Properties to open the Properties panel and click Settings.
6. Change the Output Mode to the desired setting.
7. Click OK to close the Properties panel.
8. Close the Multimedia Properties panel.
9. Close the Control Panel.
Microsoft Windows XP
1. Click Start > Control Panel and then double-click the Sounds,
Speech, and Audio Devices icon.
2. Select the Hardware tab.
3. Highlight the appropriate audio device.
4. Click Properties to open up the Device Properties panel.
5. Click the Properties tab.
6. Click the “+” next to “Audio Devices” to expand it.
7. Highlight the appropriate driver by clicking it.
177620-006.book Page 2 Thursday, March 14, 2002 3:16 PM