Filter
Top Products
Troubleshooting Guide E–1
E
Installing SCSI Drivers for Windows NT
Installation
The information in this appendix applies to Evo Workstations only.
✎
The following information does not apply if you are completing the
initial setup of the preinstalled software or if you are restoring your
preinstalled image from the Compaq Restore CD.
If your workstation has a SCSI hard drive installed and you are
installing Microsoft Windows NT from a retail Microsoft Windows
NT Workstation CD or directly from the Compaq Operating System
CD, you must complete the following steps.
On a secondary system:
1. Go to the following Compaq Web site:
www.compaq.com/support/files/workstations/us/index.html
2. Under locate by computer, select your workstation model and
Microsoft Windows NT 4.0, then click Go.
3. Under Storage, choose Family Manager Set Drivers for your
specific SCSI controller. Visit the following Compaq Web site if
you are not sure which controller shipped with your system:
www.compaq.com/products/quickspecs/productbulletin.html
4. Download the Softpaq to a temporary directory, then execute it to
create a diskette with the required SCSI drivers.
177620-006.book Page 1 Thursday, March 14, 2002 3:16 PM