Filter
Top Products
set Commands
111
set sysinfo loginfo [-]sys | [-]tcp | [-]ipx | [-]spx
set sysinfo loginfo -sys ipx
Set the PrintNet debugging information type. Usually this information
includes unexpected errors or exceptions from the print server
divided into these groups:
sys General system messages.
tcp TCP stack messages.
ipx IPX stack messages.
spx SPX stack messages.
NOTE: This is not printer or job logging information.
set sysinfo logport null|syslog
set sysinfo logport null
Define where the debugging information should be sent to. This can
be sent to an output device off of the PrintNet I/O port or to a central
TCP/IP host running a SYSLOG daemon. To set this host, use the
command “
set sysinfo syslog
hostIPaddress
”.
set sysinfo email
emailname@IPaddress
set sysinfo email joe@192.75.11.5
Define the user email address to receive printer and job logging
information from a particular logpath on the PrintNet.
emailname
is
the host or IP name of the user and
IPaddress
is the IP address
where the mail is stored on your network.
set sysinfo syslog
hostIPaddress
set sysinfo syslog 192.75.11.30
Set the IP address of the host running the SYSLOG daemon.
PrintNet debugging or print job and printer logging information can be
sent to that IP address.
set sysinfo dns
DNSserverIPaddress
set sysinfo dns 192.75.11.2
Set your DNS server IP address so the PrintNet can resolve host
names when used with its built-in Telnet and Ping clients.