Compaq 5525B/31/32 Printer User Manual


 
Mandatory
51
Unix PrintNet Configuration
There are mandatory settings needed before the print server can be
detected on the network, as well as some additional optional settings.
This section offers alternative methods for configuring your PrintNet and
mentions some of the more common optional settings available.
Mandatory
Since TCP/IP is used, the PrintNet must be configured, at a minimum,
with an IP address and subnet mask before it can be seen on the
network.
Optional
Additional settings, like routing entries, can be configured allowing for
communication across subnets.
Configuration of the PrintNet can be done from the control panel or
through host commands.
Configuration Using the Control Panel
You can set any of three listed parameters from the printer control panel.
These parameters are located on the Ethernet Parameters menu. The
available parameters are:
IP Address
Gateway Address
Subnet Mask