Filter
Top Products
Chapter 8 Complete Command List
118
ping [-s]
hostIPaddress
[
datasize
[
packetnumber
]]
ping 192.75.11.30
“ping” another TCP/IP host specified by
hostIPaddress
on the
PrintNet network.
datasize
is the datagram packet size which
defaults to 64 bytes if no size is included in the syntax and
packetnumber
is the number of requests to be sent.
NOTE: To use a host or IP name instead of the address, you must have
set the DNS server on the PrintNet. Use the command “set
sysinfo dns...” to do this.
telnet
hostIPaddress
[
escapecharacter
]
telnet 192.75.11.35
Start a Telnet session with another TCP/IP host specified by
hostIPaddress
on the PrintNet network. If
escapecharacter
is used,
it resets the key sequence used to exit the Telnet session. It will
return you to the telnet> prompt where you can execute “
quit
”. Use
the “
keycode
” command to find out exact escape characters if
needed. The default character is CTRL-].
NOTE: To use a host or IP name instead of the address, you must have
set the DNS server on the PrintNet. Use the command “
set
sysinfo dns...
” to do this.
chr
string
Echo
string
or redirect
string
to an I/O port using “chr
string
>
ioport
”.
keycode
Determine the hexadecimal value for a key to be used as the escape
character with the PrintNet built-in “
telnet” command.