Crestron electronic QM-FTCC Laptop User Manual


 
Crestron QM-FTCC FlipTop Computer Center
QM
8
1
This eight-pin RJ-45 transport port, located on the bottom side of the
QM-FTCC, allows connection of the QuickMedia cable. It carries audio, video,
and microphone signals over CresCAT-QM cable to a QuickMedia receiver or
switcher. For more information on QuickMedia refer to page 2.
RJ-45 QuickMedia Connector Pin Assignments
RJ-45 PIN
NUMBER
WIRE COLORS
(EIA 568B)
QM ASSIGNMENT
RGB, COMPOSITE, COMPONENT
S-VIDEO, AND AUDIO
1 WHITE/ORANGE - RGB RED (- CHROMINANCE) (-P
R
)
2 ORANGE + RGB RED (+ CHROMINANCE) (+P
R
)
3 WHITE/GREEN - RGB GREEN (- LUMINANCE) (-Y)
4 BLUE + AUDIO
5 WHITE/BLUE - AUDIO
6 GREEN + RGB GREEN (+ LUMINANCE) (+Y)
7 WHITE/BROWN - RGB BLUE (- COMPOSITE) (-P
B
)
RJ-45 MALE CONNECTOR
8 BROWN + RGB BLUE (+ COMPOSITE) (+P
B
)
NOTE: Always use CresCAT-QM cable to make QuickMedia connections.
NOTE: CresCAT-QM siamese cable includes four wires for making Cresnet
connections.
Ethernet
8
1
An 8-position RJ-45 port is used for connection to the Ethernet, providing local
area network or Web access (cable is not supplied).
RJ-45 Ethernet Port Pinouts
RJ-45 PIN
NUMBER
SIGNALS
1 TD +
2 TD -
3 RD +
4 Connected to pin 5
5 Connected to pin 4
6 RD -
7 Connected to pin 8
8 Connected to pin 7
AC Power
125V – 50/60Hz 10A
Connect the six-foot (183 cm) grounded AC line cord to supply AC power to the
outlet on the topside of the QM-FTCC.
Operations & Installation Guide – DOC. 6313A FlipTop Computer Center: QM-FTCC 11