Filter
Top Products
Crestron QM-FTCC FlipTop Computer Center
5. The “Firmware” window displays the model and current firmware
version. Click Upload New Firmware.
“Firmware” Window
6. The Open window allows you to browse to the desired filename (.upg)
file. Click Open to begin the transfer.
“Open” Window
7. The “Firmware” window reopens and indicates the new firmware
version.
NOTE: If problems arise when transferring any Cresnet file (touchpanel
project/firmware), lower the port speed baud rate to 38400 to match the Cresnet
bus speed.
Operations & Installation Guide – DOC. 6313A FlipTop Computer Center: QM-FTCC • 51