Filter
Top Products
FlipTop Computer Center Crestron QM-FTCC
Specifications
Specifications for the QM-FTCC are given in the following table.
QM-FTCC Specifications
SPECIFICATION DETAILS
Cresnet Power Usage 8 Watts (0.33 Amp @ 24 VDC)
Default Network ID 1A
Video Formats RGBHV (VGA), RGsB, YP
B
P
R
Video Detection Within 2 seconds
Firmware QM-FTCC.V.3.10.upg or later
2-Series Control System
Update Files
1,2
Version 3.125.CUZ (for QM-RMCRX-BA) or
later
Connectors
Computer Input
(1) DB15HD female, video sensing on H-sync,
component sensing (G/Y)
Computer Audio (1) 3.5mm mini-jack, computer soundcard type
QuickMedia Output (1) RJ-45 CAT5E/CAT6
Cresnet (2) 4-pin terminal blocks
Ground (1) Ground Terminal
Microphone (2) 5-pin terminal blocks
Operating Temperature and
Humidity
41º to 104º F (5º to 40º C)
10 to 90% relative humidity
(non-condensing)
Dimensions and Weight
(Domestic Models)
Width: 6.75 in (17.13 cm)
Height: 5.39 in (13.68 cm) with top closed
Depth: 5.71 in (14.49 cm)
Weight: 4.05 lbs (1.84 kg)
Dimensions and Weight
(International Models)
Width: 8.50 in (21.58 cm)
Height: 5.58 in (14.17 cm) with top closed
Depth: 6.67 in (16.95 cm)
Weight: 4.80 lbs (2.18 kg)
Accessories QM-FTCMK Cable Management Kit
QMI-FTCMK International Cable Management
Kit
FT-BTNB-L Button Kit
FT-BTNB-L-BLANK Button Kit
FT-BTNB-S Button Kit
FT-BTNB-S-BLANK Button Kit
International Adaptors for
QMI-FTCC Models
Refer to Appendix A on page 54
1. The latest software versions can be obtained from the Crestron website. Refer to the NOTE
following these footnotes.
2. Crestron 2-Series control systems include the AV2 and PRO2. Consult the latest Crestron Product
Catalog for a complete list of 2-Series control systems.
NOTE: Crestron software and any files on the website are for Authorized
Crestron dealers and Crestron Authorized Independent Programmers (CAIP)
only. New users may be required to register to obtain access to certain areas of
the site (including the FTP site).
4 • FlipTop Computer Center: QM-FTCC Operations & Installation Guide - DOC. 6313A