Filter
Top Products
FlipTop Computer Center Crestron QM-FTCC
Firmware Upgrade
A firmware upgrade
file has the extension .upg.
To take advantage of all the QM-FTCC features, it is important that the unit
contains the latest firmware available. Please check the Crestron website for the
latest version of firmware. Not every product has a firmware upgrade, but as
Crestron improves functions, adds new features, and extends the capabilities of
its products, firmware upgrades are posted.
To upgrade the firmware, complete the following steps.
NOTE: A firmware upgrade file has the extension .upg.
The following is the acceptable file extension for a firmware update file.
.upg QM-FTCC.V.XXXXX.upg
1. Make sure that “Communication Settings,” which begins on page 44,
has been performed.
2. Open Crestron Toolbox.
3. Once communication is established, click Tools | System Info. The
Functions menu becomes available.
4. As shown after this step, select Functions | Firmware.
Functions Menu - Firmware Selection
50 • FlipTop Computer Center: QM-FTCC Operations & Installation Guide - DOC. 6313A