Filter
Top Products
FlipTop Computer Center Crestron QM-FTCC
6. Select the device and then click the Assign QuickMedia Devices and
Routing button
located on the menu bar, and drag the QM devices
from the library on the right side, to the QM system on the left side.
SystemBuilder – Menu Bar, Assign Quick Media Devices and Routing
As devices are added from the library (on the right) to the system (on
the left), they are automatically assigned sequential Net IDs.
SystemBuilder – Equipment Room and Library
7. The QM-FTCC has three default programming modules already
prepared in SystemBuilder. When you choose the QM-FTCC, the
following notice is displayed. Click Yes to select one of the default
modules.
26 • FlipTop Computer Center: QM-FTCC Operations & Installation Guide - DOC. 6313A