Filter
Top Products
FlipTop Computer Center Crestron QM-FTCC
“Device Settings” Window
NOTE: This procedure sets the Net ID for the QM-FTCC in the program only.
It does not automatically set the Net ID for the QM-FTCC hardware. SIMPL
Windows automatically changes Net ID values of a device added to a program if
a duplicate device or a device with the same Net ID already exists in the
program. Always ensure that the hardware and software settings of the Net ID
match. For Net ID hardware setting details, refer to “Identity Code” on page 14.
Symbols in Programming Manager
Three symbols make up the QM-FTCC: Basic Controls, Microphone Controls,
and Buttons. These symbols may be opened in Detail View. Following each
symbol, a table lists the symbol input and output signals, respectively, and their
functional description.
Basic Controls
The Basic Controls module is built into slot 01 of the QM-FTCC.
• The QM-FTCC provides one RGB video input labeled COMPUTER,
which accepts one computer or component video source.
• The QM-FTCC provides one stereo line-level input labeled
COMPUTER AUDIO.
• In addition to the stereo audio, the QM-FTCC provides two
microphone/line-level inputs.
• The QM-FTCC provides one QM output that transmits the RGB or
component video together with the program audio and one or both
microphones via CresCAT-QM.
QM-FTCC Symbol – Detail View of Basic Controls
34 • FlipTop Computer Center: QM-FTCC Operations & Installation Guide - DOC. 6313A