Crestron QM-FTCC FlipTop Computer Center
Configuration Software
Have a question or comment about Crestron software?
Answers to frequently asked questions (FAQs) can be viewed in the Online Help
section of the Crestron website. To post a question or view questions you have
submitted to Crestron’s True Blue Support, log in at http://support.crestron.com.
First-time users will need to establish a user account.
Use the Crestron programming tool Crestron SystemBuilder™ to create a
control program for a QuickMedia control system.
The flexibility of SIMPL Windows requires a much greater degree of
programming expertise and is not recommended for this application. However,
SIMPL Windows information is included in this guide. Use the advanced
techniques available in SIMPL Windows to customize the job only if necessary.
Earliest Version Software Requirements for the
PC
NOTE: Crestron recommends that you use the latest software to take advantage
of the most recently released features. The latest software is available from the
Crestron website.
NOTE: Crestron software and any files on the website are for Authorized
Crestron dealers and Crestron Authorized Independent Programmers (CAIP)
only. New users are required to register to obtain access to certain areas of the
site (including the FTP site).
The following are the earliest useable software version requirements for the PC:
• (Optional but highly recommended) SystemBuilder version 2.0
(Requires SIMPL Windows, VT Pro-e and Crestron database and
Crestron Engraver).
• SIMPL Windows version 2.06 or later. Library 332 and SIMPL+ Cross
Compiler version 1.1 are required. Library 346 for NB versions.
• Crestron Database version 17.2 or later (17.3 or later for NB versions).
Required by SIMPL Windows.
• Crestron Toolbox version 1.0 or later.
• Crestron Engraver version 2.3.3 or later (only required if using
SystemBuilder).
• Crestron RoomView
®
version 6.0 (required for room management).
NOTE: The NB versions may be programmed with the regular QM FlipTop
devices, but will not match during SystemBuilder verification procedure in the
finish stage.
Operations & Installation Guide – DOC. 6313A FlipTop Computer Center: QM-FTCC • 23