Filter
Top Products
Removing and Replacing Parts 4-3
F
loor Stand
Figure 4-1. Floor Stand Removal
To remove the floor stand, follow these steps:
1. Place left side of the system unit on a flat work surface.
2. Unscrew the floor stand screw.
Use your fingers or a wide flat-blade screwdriver to unscrew the floor stand
screw. The screw is captured and separated from the floor stand.
3. Pull the floor stand away from the system unit.
Disengage the three orientation nubs that position and help hold the floor
stand to the system unit.
floor stand screw